Description
MAIN FEATURES
1. Modern and attractive design construction
2. Storage box with stopper and conical sides, oval in shape for easy unloading
3. Large compaction chamber (1800x1100mm)
4. High compaction force [32Ton]
5. Compaction plate with low-wear side and bottom guides (self-lubricated polyamide) that is easy to tune and replace and with scraper blades next to the bottom
6. Waste retention claws at the entrance of the storage box to prevent waste from returning
7. The control system is simple and intuitive to use, with the possibility of being adapted for each application
8. Optimal signalling of operation, faults and breakdowns (light signalling on the control panel and message display on the screen)
9. Three-phase power supply 400V, 50Hz (CEE 16A plug, 5 pins)
10. Loading, unloading and tipping by truck equipped with hook-lift container doors
11. Construction in compliance with safety standards (Directive 2006/42/EC – Machinery Directive)
MAIN FUNCTIONS
1. Carrying out a set of compaction cycles with the compaction plate stopping in the retracted position
2. Resetting with repositioning of the compaction plate in the retracted position
3. Immediate stopping of the compaction plate in case of emergency
4. Immediate stopping of the compaction plate in case of breakdown
5. Stopping the compaction plate in the retracted or forward position when the storage box is full
6. Signalling of operation and breakdowns
OPTIONAL
1. Hardox 450 compaction chamber sides
2. Hook on discharge door and front rollers
3. Any requirements for the loading box (balconies, hopper, lid, etc.)
4. Hydraulic drive for discharge door
5. Signalling by acoustic and light buzzer
6. Container unloading system (container tilter)
7. Power supply on both sides
8. Specific control requirements (command on both sides, remote control plug, command on removable panel, remote control, touch panel control, etc.)
9. Control via GSM and sending of information via SMS (¾ Full, Full, etc.)
10. Others.
