Description
STRUCTURE
- BASE AND WINGS WITH STEEL WEBBING STRUCTURE WITH CROSS-LINKED CORE, TO INCREASE THE BENDING AND TORSION STIFFNESS VALUE
- WEAR-RESISTANT STEEL INNER AND OUTER WINGS SURFACES
ELECTRONICS
- CSA: end-of-stroke shock absorbers
- EPS: non-contact stroke limiters
- ECA: stroke economiser
- KNEE: angular sensor to control the overstroke of the wings
- IDS: inductive end-of-stroke sensors
- HP: working cycle economiser
- DOUBLE ENCLOSURE ELECTRICAL PANEL
- TOUCH SCREEN
- REMOTE CONTROL
HYDRAULIC UNIT
- axial piston pumps
- oil filtering and cooling pump
- piloting pump
- distribution valves to CETOP standards
- proportional distribution valves
- SIR: integrated fast/slow system
- logic element panel
- air filters
- filtering on independent external circuit
- filtering on the pilot line
- air-oil cooling system
- LCC: centralised shear lubrication
- LAC: automatic lubrication of hinges
- LAS: automatic lubrication of cylinder lids
TRACKS
- REMOTE CONTROL FOR TRACKS
“CAT” THE TRANSPORTABLE SHEAR BALER | Cat 7 | Cat 8 | Cat 10 | Cat 12 | Cat 14 | |
---|---|---|---|---|---|---|
Shear cylinders | n° | 2 | 2 | 2 | 2 | 2 |
Cutting force | t | 750 | 850 | 950 | 1250 | 1400 |
Clamp | – | – | – | – | – | |
SB: swinging wings compression system | SBxc | SBxc | SBxc | SBxc | SBxc | |
Over stroke on both wings with 90° stop | – | – | – | – | – | |
Open box dimension | mm | 2500 x 6100 | 2500 x 7200 | 2500 x 7200 | 2600 x 7200 | 2600 x 7200 |
Bale dimension | mm | 900 x 600 | 900 x 600 | 900 x 600 | 1000 x 600 | 1000 x 600 |
Cylinders for each wing | n° | 2 | 3 | 3 | 3 | 3 |
Main compression cylinder | t | 150 | 150 | 150 | 150 | 150 |
Diesel engine | Hp | 280 | 400 | 400 | 500 | 500 |